Thursday, December 17, 2009
Subscribe to:
Post Comments (Atom)
skip to main |
skip to sidebar
Helpful Tips
-No superglue! You need to have setting time to make sure things are properly aligned. And with G glue, get rid of any excess that spills out wheb you're tightening the faceplate into position! - DR
-Placement of the head mortise is critical: at least 4 mm to the back of the head & not too close to the cheek edges with the front corners. And the mortise must be long enough for a sufficient winding, with its front wall beveled. Good luck! - DR
-Placement of the head mortise is critical: at least 4 mm to the back of the head & not too close to the cheek edges with the front corners. And the mortise must be long enough for a sufficient winding, with its front wall beveled. Good luck! - DR
hey dad this is sam. i love reading about the stuff you like to do, and hope i can do projects as awesome as you do someday. hope you see this someday. right now its 2016. love you
ReplyDelete