Subscribe to:
Post Comments (Atom)
skip to main |
skip to sidebar
Helpful Tips
-No superglue! You need to have setting time to make sure things are properly aligned. And with G glue, get rid of any excess that spills out wheb you're tightening the faceplate into position! - DR
-Placement of the head mortise is critical: at least 4 mm to the back of the head & not too close to the cheek edges with the front corners. And the mortise must be long enough for a sufficient winding, with its front wall beveled. Good luck! - DR
-Placement of the head mortise is critical: at least 4 mm to the back of the head & not too close to the cheek edges with the front corners. And the mortise must be long enough for a sufficient winding, with its front wall beveled. Good luck! - DR
Dang you look great in that awesome hat, and protective lenses. You're a masterful woodworker. I can't believe you have accomplished so much in such a short time. You're truly amazing! -ly hot.
ReplyDelete