Monday, March 29, 2010
Subscribe to:
Post Comments (Atom)
skip to main |
skip to sidebar
Helpful Tips
-No superglue! You need to have setting time to make sure things are properly aligned. And with G glue, get rid of any excess that spills out wheb you're tightening the faceplate into position! - DR
-Placement of the head mortise is critical: at least 4 mm to the back of the head & not too close to the cheek edges with the front corners. And the mortise must be long enough for a sufficient winding, with its front wall beveled. Good luck! - DR
-Placement of the head mortise is critical: at least 4 mm to the back of the head & not too close to the cheek edges with the front corners. And the mortise must be long enough for a sufficient winding, with its front wall beveled. Good luck! - DR
Good question, what is linseed, and who are any of us? I have often asked my congregation that same question....
ReplyDelete