Forming (below) and drilling (above) the silver underslide.
Trapezoid-shaped frog blank (above), cut by scroll saw out of 1x1x12 ebony plank (below).
Subscribe to:
Post Comments (Atom)
skip to main |
skip to sidebar
Helpful Tips
-No superglue! You need to have setting time to make sure things are properly aligned. And with G glue, get rid of any excess that spills out wheb you're tightening the faceplate into position! - DR
-Placement of the head mortise is critical: at least 4 mm to the back of the head & not too close to the cheek edges with the front corners. And the mortise must be long enough for a sufficient winding, with its front wall beveled. Good luck! - DR
-Placement of the head mortise is critical: at least 4 mm to the back of the head & not too close to the cheek edges with the front corners. And the mortise must be long enough for a sufficient winding, with its front wall beveled. Good luck! - DR
No comments:
Post a Comment